UTP/STP cable and CAT.5 round telephone cable,RG59/6/11/7 cable stripper. \nSimply squeeze the tool to insert the cable, release and spin it using the extra-large finger hole. \nMade with 3 blades ensure accurate stripping length of each cable section. Built-in 3 screws for accurate depth-of-cut and blade adjustment. \n \nFit Cable Size: RG59/RG6/RG11/RG7 \nCable Type: Coaxial cable, UTP/STP cable, Telephone round/flat cable \nMaterial: Plastic grip and metal Knives \nBlade Material: SK-5 \nFunction: Stripping and Cutting \n \nFunction： \n \n1.Cassette is reversible: One side is available for RG59/6 and another side is for RG7/11. \n \n2.For stripping coaxial cable: \na.Insert the cable until it aligns with the cable guide. \nb.Insert your index finger into the stripper's finger ring.rotate the stripper by counter clockwise 3-5 times.The cable insulation is cut while you are turning the stripper. \nc.Open the jaws and remove the cable.Pull away the outer jacket and dielectric to expose the inner conductor. \nd.Stripping distance is designed for 6mm.for each dielectric and inner conduct. \n \n3.For stripping round networking cable: \na.Insert the cable into the second stripping hole.rotate 1-3 times at counter clockwise. and then open the jaw and remove the outer jacket. \nb.The black color adjusting knob is for adjusting the blade's depth.Turn clockwise for increasing the blade's depth and counter clockwise for reducing the depth. \n \n4.For cutting coaxial cable,Round networking cable or flat telephone cable,place the cable in position and then squeeze the handles. \n \n5.For stripping flat cable.Insert the cable between the stripper blades.Squeeze handles.Cable must be kept perpendicular and then pull from the tool.