POWR All-In-One is an affordable, high quality paint that saves you the effort and expense of repainting in a year or two. Get the best, first time round, to protect the most expensive investment you will ever make – your property.

Developed for the harsh African climate - UV stable and weather resistant.

You will also note that this unique All in One paint is not just a paint with the ultimate stretch - this low sheen paint is also used for decorative purposes and comes in the 12 most popular colours used for painting upmarket townhouse complexes, office parks, flats and houses. 

Features:

• Built-in rust retarder additive.
• Non-toxic.
• Contains a fungicide additive for bathroom and kitchen ceilings.
• Non-drip
• Hail resistant
• High flexibility
• Excellent thermal expansion & contraction 
• Non-flaking
• Crack-bridging
• Dust-resistant
• Non-flammable
• Waterproof
• Low sheen

Application Areas:

• Interior and exterior walls
• Cement tiles (new or weathered), fibre cement sheeting (new or weathered)
• Primed metal
• Wooden substrates
• Flat cement/concrete roofs/wall top
• Galvanised sheeting
• Steel
• Seals nail heads and roofing bolts

Surface Preparation:

• Rusted Metal - Affected areas need to be cleaned back to bright metal and spot primed with water based metal primer. Remove collected sand and dust from the area. Apply 1-2 coats of POWR All In One.

• New Metal - Degrease surfaces with a galvanized iron cleaner to remove the manufacturer’s grease protective layer. This process is repeated until the surface is water-break-free. Prime the clean degreased metal with a water-based metal primer. Rinse well with potable water. Apply 1-2 coats of POWR All In One.

• Uncoated Cement Plaster surfaces - Remove dust, foreign material, and
  fungal and algae growth. Fill all visible cracks and seal with a suitable plaster primer. Apply 1-2 coats of POWR All In One.
  

• Fibre Cement Surfaces (Uncoated, Weathered, or New) - Remove dust, foreign material, and fungal and algae growth. If friable or powdery, seal with a suitable bonding liquid or plaster primer. Apply 1-2 coats of POWR All In One.

• Previously Painted Surfaces - Make sure old paint coatings are firm and solid.  Remove all loose, flaking, and bubbling paint.  Remove all dust, grease, foreign material, fungal, and algae growth. Allow to dry. If then powdery or friable, seal with a suitable bonding liquid or plaster primer. Test the product for adhesion on high-gloss enamel surfaces. If required, apply 1 coat of universal undercoat and allow to dry for 6 hours before overcoating with POWR All In One. Apply 1-2 coats of POWR All In One.

 Application:

• Apply with a brush or roller. 
• Do not exceed 4sqm. per litre - a 5lt = 20sqm. & 20lt = 80sqm.
• Can be applied on steel, wood, roof tiles, concrete roofs, wall interiors and exteriors, all metal, galvanized sheeting and fiber cement fascias - a unique all surface paint.
• All pre-painted substrates - apply a universal undercoat before painting over enamel/solvent-based paint
• Clean brush/roller with water after use.

 Click below for Data Sheet

What's in the Box:

1 x POWR All In One All Surface Paint

 (Available in 5-litre and 20-litre buckets and in 12 decorative colours)